EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series Routing Configuration Guide

Cisco ASR 9000 Series
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
9.
show bgp [ vrf vrf-name ] ip-address
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters route policy configuration
mode and specifies the name of the
route policy to be configured.
route-policy name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy costA
Step 2
Specifies the BGP extended
community attribute for cost.
set extcommunity cost { cost-extcommunity-set-name | cost-inline-extcommunity-set
} [ additive ]
Example:
RP/0/RSP0/CPU0:router(config)# set extcommunity cost cost_A
Step 3
Ends the definition of a route
policy and exits route policy
configuration mode.
end-policy
Example:
RP/0/RSP0/CPU0:router(config)# end-policy
Step 4
Enters BGP configuration mode
allowing you to configure the BGP
routing process.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 120
Step 5
Applies the cost community to the
attach point (route policy).
Do one of the following:
Step 6
•
default-information originate
•
aggregate-address address/mask-length [ as-set ] [ as-confed-set ] [
summary-only ] [ route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast
| vpnv4 unicast } redistribute connected [ metric metric-value ] [
route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast
| vpnv4 unicast } redistribute eigrp process-id [ match { external |
internal }] [ metric metric-value ] [ route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast
| vpnv4 unicast } redistribute isis process-id [ level { 1 | 1-inter-area
| 2 }] [ metric metric-value ] [ route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast
| vpnv4 unicast } redistribute ospf process-id [ match { external [ 1
| 2 ] | internal | nssa-external [ 1 | 2 ]}] [ metric metric-value ] [
route-policy route-policy-name ]
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
119
Implementing BGP
Configuring the BGP Cost Community

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals