Cisco ASR 9000 Series Routing Configuration Guide

CHAPTER 1
New and Changed Routing Features
This table summarizes the new and changed feature information for the Cisco ASR 9000 Series Aggregation
Services Router Routing Configuration Guide, and tells you where they are documented.
•
New and Changed Routing Feature Information, page 1
New and Changed Routing Feature Information
Where DocumentedIntroduced/Changed in
Release
DescriptionFeature
Implementing OSPF
chapter
OSPF strict-mode
Support for BFD
Dampening, on page 414
Release 5.3.2This feature was
introduced.
OSPF strict-mode
Support for BFD
Dampening
Implementing OSPF
chapter
OSPF FIB Download
Notification, on page 417
Release 5.3.2This feature was
introduced.
OSPF FIB Download
Notification
Implementing RPL
Chapter
RPL - if prefix
is-best-path/is-best-multipath,
on page 592
Release 5.3.2This feature was
introduced.
RPL - if prefix
is-best-path /
is-best-multipath
Implementing BGP
chapter
Release 5.3.2This feature was
introduced.
BGP DMZ aggregate
bandwidth
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
1

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model