Cisco Catalyst 3750-E - Page 24

Contents
xxiv
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Default MVR Configuration 24-20
MVR Configuration Guidelines and Limitations 24-20
Configuring MVR Global Parameters 24-21
Configuring MVR Interfaces 24-22
Displaying MVR Information 24-23
Configuring IGMP Filtering and Throttling 24-24
Default IGMP Filtering and Throttling Configuration 24-24
Configuring IGMP Profiles 24-25
Applying IGMP Profiles 24-26
Setting the Maximum Number of IGMP Groups 24-27
Configuring the IGMP Throttling Action 24-27
Displaying IGMP Filtering and Throttling Configuration 24-29
CHAPTER 25 Configuring IPv6 MLD Snooping 25-1
Understanding MLD Snooping 25-1
MLD Messages 25-3
MLD Queries 25-3
Multicast Client Aging Robustness 25-3
Multicast Router Discovery 25-4
MLD Reports 25-4
MLD Done Messages and Immediate-Leave 25-4
Topology Change Notification Processing 25-5
MLD Snooping in Switch Stacks 25-5
Configuring IPv6 MLD Snooping 25-5
Default MLD Snooping Configuration 25-6
MLD Snooping Configuration Guidelines 25-6
Enabling or Disabling MLD Snooping 25-7
Configuring a Static Multicast Group 25-8
Configuring a Multicast Router Port 25-8
Enabling MLD Immediate Leave 25-9
Configuring MLD Snooping Queries 25-10
Disabling MLD Listener Message Suppression 25-11
Displaying MLD Snooping Information 25-12
CHAPTER 26 Configuring Port-Based Traffic Control 26-1
Configuring Storm Control 26-1
Understanding Storm Control 26-1
Default Storm Control Configuration 26-3
Configuring Storm Control and Threshold Levels 26-3