Cisco Catalyst 3750-E - Page 39

Contents
xxxix
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
WCCP and Switch Stacks 45-4
Unsupported WCCP Features 45-5
Configuring WCCP 45-5
Default WCCP Configuration 45-5
WCCP Configuration Guidelines 45-5
Enabling the Cache Service 45-6
Monitoring and Maintaining WCCP 45-10
CHAPTER 46 Configuring IP Multicast Routing 46-1
Understanding Cisco’s Implementation of IP Multicast Routing 46-2
Understanding IGMP 46-3
IGMP Version 1 46-3
IGMP Version 2 46-3
Understanding PIM 46-4
PIM Versions 46-4
PIM Modes 46-4
PIM Stub Routing 46-5
IGMP Helper 46-6
Auto-RP 46-7
Bootstrap Router 46-7
Multicast Forwarding and Reverse Path Check 46-8
Understanding DVMRP 46-9
Understanding CGMP 46-9
Multicast Routing and Switch Stacks 46-10
Configuring IP Multicast Routing 46-10
Default Multicast Routing Configuration 46-11
Multicast Routing Configuration Guidelines 46-11
PIMv1 and PIMv2 Interoperability 46-11
Auto-RP and BSR Configuration Guidelines 46-12
Configuring Basic Multicast Routing 46-12
Configuring Source-Specific Multicast 46-14
SSM Components Overview 46-14
How SSM Differs from Internet Standard Multicast 46-14
SSM IP Address Range 46-15
SSM Operations 46-15
IGMPv3 Host Signalling 46-15
Configuration Guidelines 46-16
Configuring SSM 46-17
Monitoring SSM 46-17