Contents
xl
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Configuring Source Specific Multicast Mapping 46-17
SSM Mapping Configuration Guidelines and Restrictions 46-17
SSM Mapping Overview 46-18
Configuring SSM Mapping 46-19
Monitoring SSM Mapping 46-21
Configuring PIM Stub Routing 46-22
PIM Stub Routing Configuration Guidelines 46-22
Enabling PIM Stub Routing 46-22
Configuring a Rendezvous Point 46-23
Manually Assigning an RP to Multicast Groups 46-24
Configuring Auto-RP 46-25
Configuring PIMv2 BSR 46-29
Using Auto-RP and a BSR 46-33
Monitoring the RP Mapping Information 46-35
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 46-35
Configuring Advanced PIM Features 46-35
Understanding PIM Shared Tree and Source Tree 46-35
Delaying the Use of PIM Shortest-Path Tree 46-37
Modifying the PIM Router-Query Message Interval 46-38
Configuring Optional IGMP Features 46-38
Default IGMP Configuration 46-39
Configuring the Switch as a Member of a Group 46-39
Controlling Access to IP Multicast Groups 46-40
Changing the IGMP Version 46-41
Modifying the IGMP Host-Query Message Interval 46-42
Changing the IGMP Query Timeout for IGMPv2 46-42
Changing the Maximum Query Response Time for IGMPv2 46-43
Configuring the Switch as a Statically Connected Member 46-44
Configuring Optional Multicast Routing Features 46-44
Enabling CGMP Server Support 46-45
Configuring sdr Listener Support 46-46
Enabling sdr Listener Support 46-46
Limiting How Long an sdr Cache Entry Exists 46-46
Configuring an IP Multicast Boundary 46-47
Configuring Basic DVMRP Interoperability Features 46-49
Configuring DVMRP Interoperability 46-49
Configuring a DVMRP Tunnel 46-51
Advertising Network 0.0.0.0 to DVMRP Neighbors 46-53
Responding to mrinfo Requests 46-54
To Next Page
Loading...
