Contents
xli
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Configuring Advanced DVMRP Interoperability Features 46-54
Enabling DVMRP Unicast Routing 46-54
Rejecting a DVMRP Nonpruning Neighbor 46-55
Controlling Route Exchanges 46-58
Limiting the Number of DVMRP Routes Advertised 46-58
Changing the DVMRP Route Threshold 46-58
Configuring a DVMRP Summary Address 46-59
Disabling DVMRP Autosummarization 46-61
Adding a Metric Offset to the DVMRP Route 46-62
Monitoring and Maintaining IP Multicast Routing 46-63
Clearing Caches, Tables, and Databases 46-63
Displaying System and Network Statistics 46-63
Monitoring IP Multicast Routing 46-64
CHAPTER
47 Configuring MSDP 47-1
Understanding MSDP 47-1
MSDP Operation 47-2
MSDP Benefits 47-3
Configuring MSDP 47-3
Default MSDP Configuration 47-4
Configuring a Default MSDP Peer 47-4
Caching Source-Active State 47-6
Requesting Source Information from an MSDP Peer 47-8
Controlling Source Information that Your Switch Originates 47-8
Redistributing Sources 47-9
Filtering Source-Active Request Messages 47-11
Controlling Source Information that Your Switch Forwards 47-12
Using a Filter 47-12
Using TTL to Limit the Multicast Data Sent in SA Messages 47-14
Controlling Source Information that Your Switch Receives 47-14
Configuring an MSDP Mesh Group 47-16
Shutting Down an MSDP Peer 47-16
Including a Bordering PIM Dense-Mode Region in MSDP 47-17
Configuring an Originating Address other than the RP Address 47-18
Monitoring and Maintaining MSDP 47-19
CHAPTER
48 Configuring Fallback Bridging 48-1
Understanding Fallback Bridging 48-1
Fallback Bridging Overview 48-1
To Next Page
Loading...
