EasyManuals Logo

Cisco NCS 6000 Series User Manual

Cisco NCS 6000 Series
498 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
!
router bgp 100
address-family ipv4 unicast
network 10.2.3.4/24 route-policy aigp-policy
redistribute ospf osp1 metric 4 route-policy aigp-policy
!
!
end
VRF Dynamic Route Leaking Configuration: Example
These examples show how to configure VRF dynamic route leaking:
Import Routes from default-VRF to non-default-VRF
vrf vrf_1
address-family ipv6 unicast
import from default-vrf route-policy rpl_dynamic_route_import
!
end
Import Routes from non-default-VRF to default-VRF
vrf vrf_1
address-family ipv6 unicast
export to default-vrf route-policy rpl_dynamic_route_export
!
end
Flow-tag propagation
The flow-tag propagation feature enables you to establish a co-relation between route-policies and user-policies.
Flow-tag propagation using BGP allows user-side traffic-steering based on routing attributes such as, AS
number, prefix lists, community strings and extended communities. Flow-tag is a logical numeric identifier
that is distributed through RIB as one of the routing attribute of FIB entry in the FIB lookup table. A flow-tag
is instantiated using the 'set' operation from RPL and is referenced in the C3PL PBR policy, where it is
associated with actions (policy-rules) against the flow-tag value.
You can use flow-tag propagation to:
• Classify traffic based on destination IP addresses (using the Community number) or based on prefixes
(using Community number or AS number).
• Select a TE-group that matches the cost of the path to reach a service-edge based on customer site service
level agreements (SLA).
• Apply traffic policy (TE-group selection) for specific customers based on SLA with its clients.
• Divert traffic to application or cache server.
Restrictions for Flow-Tag Propagation
Some restrictions are placed with regard to using Quality-of-service Policy Propagation Using Border Gateway
Protocol (QPPB) and flow-tag feature together. These include:
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
95
Implementing BGP
VRF Dynamic Route Leaking Configuration: Example

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco NCS 6000 Series and is the answer not in the manual?

Cisco NCS 6000 Series Specifications

General IconGeneral
BrandCisco
ModelNCS 6000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals