Cisco NCS 6000 Series User Manual

3. area area-id
4. interface type interface-path-id
5. fast-reroute per-link { enable | disable }
6. commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables OSPF routing for the specified routing process and
places the router in router configuration mode.
router ospf process-name
Example:
Step 2
RP/0/RP0/CPU0:router(config)# router ospf
Enters area configuration mode.
area area-id
Example:
Step 3
RP/0/RP0/CPU0:router(config-ospf)#area 1
Enters interface configuration mode and associates one or
more interfaces to the area. .
interface type interface-path-id
Example:
Step 4
RP/0/RP0/CPU0:router(config-ospf-ar)# interface
GigabitEternet0/5/0/0
Enables or disables per-link LFA computation for the
interface.
fast-reroute per-link { enable | disable }
Example:
Step 5
RP/0/RP0/CPU0:router(config-ospf-ar)#fast-reroute
per-link enable
commit
Step 6
Excluding an Interface From IP Fast Reroute Per-link Computation
SUMMARY STEPS
1. configure
2. router ospf process-name
3. area area-id
4. interface type interface-path-id
5. fast-reroute per-link exclude interface type interface-path-id
6. commit
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
323
Implementing OSPF
Excluding an Interface From IP Fast Reroute Per-link Computation

Cisco NCS 6000 Series Specifications

General

Brand	Cisco
Model	NCS 6000 Series
Category	Network Router
Language	English