Cisco NCS 6000 Series User Manual

address-family ipv4 unicast
metric-style wide
redistribute static level-1 route-policy isis-tag-555
spf prefix-priority critical tag 13
spf prefix-priority high tag 444
spf prefix-priority medium tag 777
Configuring IS-IS Overload Bit Avoidance: Example
The following example shows how to activate IS-IS overload bit avoidance:
config
mpls traffic-eng path-selection ignore overload
The following example shows how to deactivate IS-IS overload bit avoidance:
config
no mpls traffic-eng path-selection ignore overload
Where to Go Next
To implement more IP routing protocols, see the following document modules in Routing Configuration
Guide for Cisco NCS 6000 Series Routers:
• Implementing OSPF
• Implementing BGP
• Implementing EIGRP
• Implementing RIP
Additional References
The following sections provide references related to implementing IS-IS.
Related Documents
Document TitleRelated Topic
Routing Command Reference for Cisco NCS 6000 Series Routers
IS-IS commands: complete command
syntax, command modes, command
history, defaults, usage guidelines, and
examples
Implementing MPLS Traffic Engineering on module in MPLS
Configuration Guide for Cisco NCS 6000 Series Routers
MPLS TE feature information
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
254
Implementing IS-IS
Configuring IS-IS Overload Bit Avoidance: Example

Cisco NCS 6000 Series Specifications

General

Brand	Cisco
Model	NCS 6000 Series
Category	Network Router
Language	English