Cisco NCS 6000 Series User Manual

PurposeCommand or Action
Enters BFD configuration mode.bfd
Example:
Step 2
RP/0/RP0/CPU0:router(config)# bfd
Enables IPv6 checksum support on the interface. To disable,
use the disable keyword.
ipv6 checksum [disable]
Example:
Step 3
RP/0/RP0/CPU0:router(config-bfd-if)# ipv6 checksum
disable
commit
Step 4
Enabling and Disabling IPv6 Checksum Calculations for BFD on an Individual Interface or Bundle
The following procedures describe how to enable or disable IPv6 checksum calculations on an interface or
bundle .
DETAILED STEPS
SUMMARY STEPS
1. configure
2. bfd
3. interface type interface-path-id
4. ipv6 checksum [disable]
5. commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters BFD configuration mode.bfd
Example:
Step 2
RP/0/RP0/CPU0:router(config)# bfd
Enters BFD interface configuration mode for a specific
interface.
interface type interface-path-id
Example:
Step 3
RP/0/RP0/CPU0:router(config-bfd)# interface
gigabitEthernet 0/1/5/0
Enables IPv6 checksum support on the interface. To disable,
use the disable keyword.
ipv6 checksum [disable]
Example:
Step 4
RP/0/RP0/CPU0:router(config-bfd-if)# ipv6 checksum
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
159
Implementing BFD
Enabling and Disabling IPv6 Checksum Calculations for BFD on an Individual Interface or Bundle

Cisco NCS 6000 Series Specifications

General

Brand	Cisco
Model	NCS 6000 Series
Category	Network Router
Language	English