Cisco NCS 6000 Series

DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables the OSPF routing for the specified routing process
and places the router in router configuration mode.
router ospf process-name
Example:
Step 2
RP/0/RP0/CPU0:router(config)# router ospf
Enters area configuration mode.
area area-id
Example:
Step 3
RP/0/RP0/CPU0:router(config)#area area-id
Enters interface configuration mode and associates one or
more interfaces to the area.
interface type interface-path-id
Example:
Step 4
RP/0/RP0/CPU0:router(config-ospf)#interface type
interface-path-id
Excludes an interface from IP fast reroute per-link
computation.
fast-reroute per-link exclude interface type
interface-path-id
Example:
Step 5
RP/0/RP0/CPU0:router(config-ospf-ar)# fast-reroute
per-link exclude interface GigabitEternet0/5/0/1
commit
Step 6
Enabling OSPF Interaction with SRMS Server
To enable OSPF interaction with SRMS server:
SUMMARY STEPS
1. configure
2. router ospf instance-id
3. segment-routing mpls
4. segment-routing forwarding mpls
5. segment-routing prefix-sid-mapadvertise-local
6. segment-routing sr-preferprefix-list[acl-name]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables OSPF routing for the specified routing instance,
and places the router in router configuration mode.
router ospf instance-id
Example:
Step 2
RP/0/RP0/CPU0:router(config)# router ospf isp
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
324
Implementing OSPF
Enabling OSPF Interaction with SRMS Server