Cisco NCS 6000 Series

• Implementing RIP in Routing Configuration Guide for Cisco NCS 6000 Series Routers
• RIB Commands in Routing Command Reference for Cisco NCS 6000 Series Routers
Additional References
Related Documents
Document TitleRelated Topic
RIB Commands on Cisco IOS XR Software in
Routing Command Reference for Cisco NCS 6000
Series Routers
Routing Information Base commands: complete
command syntax, command modes, command history,
defaults, usage guidelines, and examples
Standards and RFCs
TitleStandard/RFC
IP Fast Reroute Framework, by M. Shand and
S. Bryant
Draft-ietf-rtgwg-ipfrr-framework-06.txt
A Framework for Loop-free Convergence, by
M. Shand and S. Bryant
Draft-ietf-rtgwg-lf-conv-frmwk-00.txt
—No new or modified RFCs are supported by this feature, and
support for existing RFCs has not been modified by this
feature.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
—
Technical Assistance
LinkDescription
http://www.cisco.com/supportThe Cisco Support website provides extensive online resources, including
documentation and tools for troubleshooting and resolving technical issues
with Cisco products and technologies.
To receive security and technical information about your products, you can
subscribe to various services, such as the Product Alert Tool (accessed from
Field Notices), the Cisco Technical Services Newsletter, and Really Simple
Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website requires a Cisco.com user
ID and password.
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
363
Implementing and Monitoring RIB
Additional References