Cisco NCS 6000 Series User Manual

OSPF Attributes and Operators
This table summarizes the OSPF attributes and operators per attach points.
Table 8: OSPF Attributes and Operators
SetMatchAttributeAttach Point
setn/aospf-metricdefault-information
originate
setn/ametric-type
n/ainrib-has-route
setn/atag
n/a
indestinationredistribute
setn/ametric-type
n/ainnext-hop
setn/aospf-metric
n/ais, le, ge, eqrib-metric
n/aroute-has-levelroute-has-level
n/aisroute-type
setis, le, ge, letag
n/a
indestinationarea-in
n/aindestinationarea-out
n/aindestinationspf-prefix-priority
setn/aspf-priority
n/ais, le, ge, eqtag
OSPFv3 Policy Attach Points
This section describes each of the OSPFv3 policy attach points and provides a summary of the OSPFv3
attributes and operators.
Default-Information Originate
The default-information originate attach point allows the user to conditionally inject the default route 0::/0
into the OSPFv3 link-state database, which is done by evaluating the attached policy. If any routes in the local
RIB pass the policy, then the default route is inserted into the link-state database.
The following example shows how to generate a default route if any of the routes that match 2001::/96 are
present in the RIB:
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
433
Implementing Routing Policy
OSPF Attributes and Operators

Cisco NCS 6000 Series Specifications

General

Brand	Cisco
Model	NCS 6000 Series
Category	Network Router
Language	English