Cisco NCS 6000 Series

vrf cctv1
router-id 192.168.1.1
area 0
interface BVI100
!
!
!
!
interface BVI100
vrf cctv1
ipv4 address 192.168.1.1 255.255.255.0
!
interface GigE0/1/0/10
bundle id 1 mode active
no shut
!
interface Bundle-Ether1
no shut
!
interface Bundle-Ether1.100 l2transport
encapsulation dot1q 100
rewrite ingress tag pop 1 symmetric
!
bfd multipath include loc 0/1/cpu0
interface MgmtEth0/RSP1/CPU0/0
ipv4 address 7.37.19.20 255.255.0.0
no shutdown
!
router static
address-family ipv4 unicast
0.0.0.0/0 7.37.0.1
Below is the uut node example:
l2vpn
bridge group bg
bridge-domain bd
interface Bundle-Ether1.100
!
routed interface BVI100
!
!
!
router vrrp
interface BVI100
bfd minimum-interval 15
address-family ipv4
vrrp 100
address 192.168.1.254
bfd fast-detect peer ipv4 192.168.1.1
!
!
!
!
router ospf 100
vrf cctv1
router-id 192.168.1.2
area 0
interface BVI100
!
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
169
Implementing BFD
BFD Over Bridge Group Virtual Interface: Example