EasyManuals Logo

Cisco NCS 6000 Series User Manual

Cisco NCS 6000 Series
498 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
[flags 0x300]
path-idx 1 [0x1dc22110 0x0]
next hop 1.1.1.2
remote adjacency
local label 16011 labels imposed {16002 16003}
Load distribution: 0 (refcount 2)
Hash OK Interface Address
0 Y GigabitEthernet0/2/0/0 remote
--------------------------------------------------------------------------------------------------------------
RP/0/RP0/CPU0:router# show mpls forwarding prefix 10.1.1.1/32
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
16011 16001 10.1.1.1/32 SI0/2/CPU0 2.2.2.3 0
{16002 10.1.1.1/32 FI0/1/CPU0 1.1.1.2 0
16003 }
------------------------------------------------------------------------------------------------------
RP/0/RP0/CPU0:router# show mpls forwarding prefix 10.1.1.1/32 detail
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
16011 16001 10.1.1.1/32 SI0/2/CPU0 2.2.2.3 0
Updated Apr 29 14:25:09.770
Path Flags: 0x400 [ BKUP-IDX:1 (0x1dc460cc) ]
Version: 5, Priority: 3
MAC/Encaps: 0/4, MTU: 8000
Label Stack (Top -> Bottom): { 16001 }
Packets Switched: 0
{ 16002 10.1.1.1/32 FI0/1/CPU0 1.1.1.2 0
16003 }
Updated Apr 29 14:25:09.770
Path Flags: 0x300 [ IDX:1 BKUP-REMOTE ]
MAC/Encaps: 0/4, MTU: 1500
Label Stack (Top -> Bottom): { 16002 16003 }
Packets Switched: 0
-----------------------------------------------------------------------------------------------
RP/0/RP0/CPU0:router# show mpls forwarding prefix 10.1.1.1/32
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
16011 16001 10.1.1.1/32 GI0/1/CPU0 2.2.2.3 0
{16002 10.1.1.1/32 GI0/2/CPU0 1.1.1.2 0
16003 }
----------------------------------------------------------------------------------------------------------
RP/0/RP0/CPU0:router# show mpls forwarding prefix 10.1.1.1/32 detail
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
16011 16001 10.1.1.1/32 GI0/1/CPU0 2.2.2.3 0
Updated Apr 29 14:25:09.770
Path Flags: 0x400 [ BKUP-IDX:1 (0x1dc460cc) ]
Version: 5, Priority: 3
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
243
Implementing IS-IS
Configure Remote Loop-Free Alternate Paths for IS-IS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco NCS 6000 Series and is the answer not in the manual?

Cisco NCS 6000 Series Specifications

General IconGeneral
BrandCisco
ModelNCS 6000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals