Cisco NCS 6000 Series

Related Documents
Document TitleRelated Topic
Static Routing Commands in Routing Command
Reference for Cisco NCS 6000 Series Routers
Static routes commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
Standards
TitleStandards
—No new or modified standards are supported by this feature, and support for existing standards has not
been modified by this feature.
MIBs
MIBs LinkMIBs
To locate and download MIBs using Cisco IOS XR software, use the Cisco MIB Locator found at the
following URL and choose a platform under the Cisco Access Products menu:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
—
RFCs
TitleRFCs
—No new or modified RFCs are supported by this feature, and support for existing RFCs has not been
modified by this feature.
Technical Assistance
LinkDescription
http://www.cisco.com/techsupportThe Cisco Technical Support website contains thousands of pages of
searchable technical content, including links to products, technologies,
solutions, technical tips, and tools. Registered Cisco.com users can log
in from this page to access more content.
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
472
Implementing Static Routes
Additional References