BGP Additional Paths 40
BGP Selective Multipath 41
Accumulated Interior Gateway Protocol Attribute 42
BFD Multihop Support for BGP 43
BGP Multi-Instance and Multi-AS 43
BGP Prefix Independent Convergence for RIB and FIB 44
BGP Update Message Error Handling 44
BGP Attribute Filtering 44
BGP Attribute Filter Actions 45
BGP VRF Dynamic Route Leaking 45
How to Implement BGP 46
Enabling BGP Routing 46
Configuring Multiple BGP Instances for a Specific Autonomous System 48
Configuring a Routing Domain Confederation for BGP 49
Resetting an eBGP Session Immediately Upon Link Failure 50
Logging Neighbor Changes 50
Adjusting BGP Timers 51
Changing the BGP Default Local Preference Value 52
Configuring the MED Metric for BGP 52
Configuring BGP Weights 53
Tuning the BGP Best-Path Calculation 54
Indicating BGP Back-door Routes 55
Configuring Aggregate Addresses 56
Redistributing iBGP Routes into IGP 57
Redistributing Prefixes into Multiprotocol BGP 58
Configuring BGP Route Dampening 60
Applying Policy When Updating the Routing Table 60
Setting BGP Administrative Distance 61
Configuring a BGP Neighbor Group and Neighbors 62
Configuring a Route Reflector for BGP 64
Configuring BGP Route Filtering by Route Policy 66
Configuring BGP Attribute Filtering 67
Configuring BGP Next-Hop Trigger Delay 68
Disabling Next-Hop Processing on BGP Updates 69
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
v
Contents
To Next Page
Loading...
Need help?
General
