Managing the System
Exte rnal Device
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 167
3
STEP 6
In
UPS Model
, choose a connection method:
a. Choose
USB UPS (au to dete c t)
if your UPS is connected to the NAS via USB.
b. Choose
APC UPS with SNMP Management
if your UP S is conne cted to the
NAS via IP SNMP. Enter the IP address of the UPS in the address area.
STEP 7
Click
Apply
. Your UP S settings are updated to the NAS.