NAS Maintenance
Hardware Sy stem Reset
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 178
5
Basic System Reset (3 seconds)
The following settings are reset to their default value during a basic system reset:
To perform a basic system reset:
STEP 1
Press and hold the reset button for 3 seconds, a beep will sound.
STEP 2
Wait for the NAS to reboot.
System B a sic System Re s et
(1 beep)
Advanced System Reset
(2 beeps)
All NAS models Press the reset button for
3 seconds.
Pres s the reset but ton for
10 seconds.
Feature/Function Setting after 3 Second
Reset
System administration password admin
Adminis tration > N etw ork > TCP/ IP Obtain IP add res s set tings
automatically via DHCP
Adminis tration > N etw ork >TCP/ IP
Disable Jumbo Frame
General Settings > System Administration >
System Port
8080 (sys tem servic e port)
Adminis tration > S ec ur ity > S ec ur ity Level Low (Allow all conne ctions)
LCD panel password (only applicable to
models with LCD panel)
No Password
To Next Page
Loading...
Need help?
General
