Cloos QINEO NexT - Data Backup Job; 12 MAIN (2) - Data Backup

101
12. MAIN (2) - Data backup
A corresponding error message is shown if there is no storage medium, no
capacity left or an access error.
Plug the storage medium into the SD card slot underneath the rotary
knob 3 or into the USB connection at the back of the welding power source.
12.1 Data backup Job
In the menu, so-called jobs can be written from the welding power source
to the storage medium or from the storage medium to the job memory of
the welding power source.
INFO!
Datensicherung Qineo NexT
V1.03.31
Job
D A T E N S I C H E R U N G
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Konfig
Synergie
Figure 90. "MAIN (2)" - "Data backup" menu
Datensicherung JOB Qineo NexT
V1.03.31
Lade von
USB
Speichern
Speichere
auf USB
Laden
Datensicherung - Job
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Figure 91. "Data backup" - "Job" menu