Cloos QINEO NexT - Diagnostics - Control - Ethernet; Diagnostics - Control - I; O (Inputs and Outputs)

83
10.3.1 Diagnostics - Control - Ethernet
The MAC address, the IP address and the subnet mask of the welding
power source are displayed in this menu.
10.3.2 Diagnostics - Control - I / O (inputs and outputs)
Damage to the robot system
Changes to the signal states during Automatic mode can lead to unfore-
seeable program runs.
• Never change the signal states of inputs and outputs during
Automatic mode!
Diagnose - Ethernet
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Ethernet – Steuerung
MAC-Adresse 00-00-00-00-00-00
IP-Adresse 000.000.000.000
Subnetzmaske 000.000.000.000
Diagnose Ethernet
Figure 57. "Diagnostics" - "Ethernet" menu
Diagnose I /O + VBC
Eingänge
Jobanwahl
Ausgänge
Signal-
zustand
ändern
Normal
Ein
Aus
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Diagnose I / 0
DrahtRückw.
DrahtExtern
StartExtern
GasExtern
StromJa.
EndeSchweissP
GasJa
LB-Steht
5
8
14
9
0
0
0
0
0
0
ColdWeld
VBC
Figure 58. "Diagnostics" - "Control"- "I/O" menu
WARNING!