Cloos QINEO NexT - Config - User Management - User Overview - PAK

76
MAIN (2) - Config (Configuration)
Delete user
You can use the "Delete user" function to remove individual users:
1. Select the user via rotary knob 3.
2. Press the "Delete user" function.
• This is done without any further query.
If the last user with operating level "Configurator" is deleted, the error
message "Last configurator locked" appears.
This prevents the last authorised user from being deleted unintentionally.
9.4.2.3 Config - User management - User overview - PAK
A PAK can only save one user profile.
If you save another user on an already allocated PAK, the first user will get
lost.
You can save the created/selected users to a PAK using the "Program PAK"
function.
INFO!
INFO!
Figure 46. "Config" - "User management" - "User overview" - "PAK" menu
PAK
AUFSETZEN
PAK – Programmierung
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0