26
Qualification of users
In principle, the power source may only be transported without shielded gas
bottle.
The power source can be moved on its wheels. When using a fork lift truck,
the forks must be placed between the wheels. The power source must lie
diagonally to the moving direction and be completely on the fork.
If a crane is available, two crane belts have to be pulled crosswise under the
power source inside the wheels.
You have to use a crossbeam, if you want to lift the power source by means of
the eyebolts (crane eyelets). The arising mechanical tractions must vertically
affect the bolt axis, see label.
For the transport of the machine it is important to adhere to the valid
national and regional guidelines and safety regulations in force.
Only persons who have been trained and instructed on the machines in the
QINEO series and who have the required qualifications are permitted to carry
out work on CLOOS shielding arc welding machines.
The manufacturer is not liable for damage to property or persons caused by
unqualified personnel.
The copyright law for the safety regulations and the operating instruction
manual remains with the manufacturer.
Text and photos correspond to the latest status at the time of printing.
The contents of these safety regulations will be adapted to technical develop-
ments. Subject to alterations (Issue 09/2019).
4.2 Transport
5. Qualification of users
INFO!
To Next Page
Loading...
