142
Configuration menu
Call Job* / Call S1-S5
"locked"
The call up of the quick memory spaces / jobs* is
blocked.
"allowed"
The call up of the quick memory spaces / jobs* is
enabled.
Save Job* / Save S1-S5
"locked"
The storage on quick memory spaces / jobs* is
blocked.
"allowed"
The storage on quick memory spaces / jobs* is
enabled.
*If the option "Job memory MasterPlus" is activated, the configuration
items "Call job" ("blocked" / "allowed") and "Save job" ("blocked" / "allowed")
are available.
5.10.2 User management and PAK
Depending on the user level for login or as registered user, a coloured
symbol appears at the top of the screen.
Operating level when switching on:
• "Automatic"
• "Programmer" / Configurator"
Logged on user:
• "Automatic"
• "Programmer"
• "Configurator"
The access rights to certain functions, adjustments and welding
parameters are enabled or blocked and saved in a user profile via the user
management.
If a user logs in who is unknown to the welding power source, the access is
denied.
The user management allows to transfer these user profiles to a PAK
(Personal Access Key) each. For this, the welding power source or the
operating module must dispose of a PAK port.
The PAK is connected to the PAK port of the welding power source and the
user profile is loaded. The user is automatically logged on to the welding
power source as soon as the information saved in the PAK match with the
information saved in the welding power source. If a user who is unknown
to the welding power source logs on with a PAK, he is denied access or his
user profile is transferred to the user management via his PAK and stored.
The respective user profile is then activated in the welding power source.
INFO!
To Next Page
Loading...
