COBHAM SAILOR 100 GX User Manual

Removal and replacement of ADU modules
99-145912-A Chapter 8: Service & maintenance 8-57
Service & maintenance
6. Disconnect the connector from the Elevation ZRM.
7. Loosen the 2x4 mm Allen screws.
8. Slide out the Elevation ZRM.
To insert a new Elevation ZRM follow the instructions above in reverse
order.
Figure 8-71: Elevation ZRM, disconnect connector
Figure 8-72: Elevation ZRM, remove screws
Important
It is very important that you slide the ZRM all the way into
the guide pins.

COBHAM SAILOR 100 GX Specifications

General

Brand	COBHAM
Model	SAILOR 100 GX
Category	Marine Equipment
Language	English