Codan HF SSB - Page 111

Setup procedures—Part 2
HF SSB transceiver reference manual 6-13
Action Notes
4.
Press
F2
If you selected
DISABLED
or
RECEIVE-ALL,
the display
shows:
EXIT
EMGCY S'CALL MENU
1–Transmit
ENTER
2–Receive
If you selected
SELECTIVE,
the display shows:
EXIT PROGRAM
Emgcy S'call Rx ID: 1
Receive ID: – – – – – –
5.
Did you select
SELECTIVE
and do
you want to set up extra
addresses?
Yes  Step 6.
No  Step 11.
SELECTIVE
gives you the
option of setting two other
addresses for receiving
emergency selcalls in addition
to your address.
6.
To select one of the two
additional addresses,
rotate
Select
Example of the display:
EXIT PROGRAM
Emgcy S'call Rx ID: 1
Receive ID: – – – – – –
Setup procedures—Part 2
HF SSB transceiver reference manual 6-13
Action Notes
4.
Press
F2
If you selected
DISABLED
or
RECEIVE-ALL,
the display
shows:
EXIT
EMGCY S'CALL MENU
1–Transmit
ENTER
2–Receive
If you selected
SELECTIVE,
the display shows:
EXIT PROGRAM
Emgcy S'call Rx ID: 1
Receive ID: – – – – – –
5.
Did you select
SELECTIVE
and do
you want to set up extra
addresses?
Yes  Step 6.
No  Step 11.
SELECTIVE
gives you the
option of setting two other
addresses for receiving
emergency selcalls in addition
to your address.
6.
To select one of the two
additional addresses,
rotate
Select
Example of the display:
EXIT PROGRAM
Emgcy S'call Rx ID: 1
Receive ID: – – – – – –