Codan HF SSB - 8 Setup procedures-part 4

HF SSB transceiver reference manual 8-1
8 Setup procedures—part 4
This chapter contains the following Setup mode procedures:
• Scan table automatic scanning start* (8-2)
• Scan table editing on/off* (8-4)
• Selcall address setup (8-6)
• Selcall address size compatibility (8-13)
• Selcall lockout on/off (8-16)
• Selcall mute availability on/off (8-18)
• Status call availability on/off (8-20)
• Telcall availability on/off (8-22)
• Tone call setup* (8-24)
• 99-beacon call response on/off (8-27).
* indicates a standard procedure available in all HF SSB
series transceivers (see Chapter 4, Using Setup mode
procedures).
HF SSB transceiver reference manual 8-1
8 Setup procedures—part 4
This chapter contains the following Setup mode procedures:
• Scan table automatic scanning start* (8-2)
• Scan table editing on/off* (8-4)
• Selcall address setup (8-6)
• Selcall address size compatibility (8-13)
• Selcall lockout on/off (8-16)
• Selcall mute availability on/off (8-18)
• Status call availability on/off (8-20)
• Telcall availability on/off (8-22)
• Tone call setup* (8-24)
• 99-beacon call response on/off (8-27).
* indicates a standard procedure available in all HF SSB
series transceivers (see Chapter 4, Using Setup mode
procedures).