Codan HF SSB - ALE sounding interval

Setup procedures—Part 1
HF SSB transceiver reference manual 5-13
ALE sounding interval
Setup code 2433
This procedure is used to change the ALE sounding time
interval.
ALE stations repeatedly send sounding signals to determine
how good each channel is for transmission. The ALE
sounding interval is the time between signal transmissions.
You can select:
•
30 Mins
•
45 Mins
•
1 Hour
•
2 Hours
•
4 Hours
•
8 Hours
•
16 Hours
.
To change the ALE sounding time interval:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
Setup procedures—Part 1
HF SSB transceiver reference manual 5-13
ALE sounding interval
Setup code 2433
This procedure is used to change the ALE sounding time
interval.
ALE stations repeatedly send sounding signals to determine
how good each channel is for transmission. The ALE
sounding interval is the time between signal transmissions.
You can select:
•
30 Mins
•
45 Mins
•
1 Hour
•
2 Hours
•
4 Hours
•
8 Hours
•
16 Hours
.
To change the ALE sounding time interval:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2