Setup procedures—Part 1
HF SSB transceiver reference manual 5-15
Beep loudness
Setup code 33 (standard procedure)
This procedure is used to change the volume of beeps made
by the transceiver.
You can select:
•
NORMAL
(error beeps loud and acceptance beeps soft)
•
SOFT
(all beeps soft)
•
LOUD
(all beeps loud).
To change the beep loudness:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 33
numeral
button
The display looks like one of
the following:
EXIT
Soft and loud beeps
ENTER
NORMAL
Adjust Beep Volume
EXIT
Always soft beeps
ENTER
SOFT
Adjust Beep Volume
EXIT
Always loud beeps
ENTER
LOUD
Adjust Beep Volume
Setup procedures—Part 1
HF SSB transceiver reference manual 5-15
Beep loudness
Setup code 33 (standard procedure)
This procedure is used to change the volume of beeps made
by the transceiver.
You can select:
•
NORMAL
(error beeps loud and acceptance beeps soft)
•
SOFT
(all beeps soft)
•
LOUD
(all beeps loud).
To change the beep loudness:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 33
numeral
button
The display looks like one of
the following:
EXIT
Soft and loud beeps
ENTER
NORMAL
Adjust Beep Volume
EXIT
Always soft beeps
ENTER
SOFT
Adjust Beep Volume
EXIT
Always loud beeps
ENTER
LOUD
Adjust Beep Volume