Codan HF SSB - 9 Link Setup mode

HF SSB transceiver reference manual 9-1
9 Link Setup mode
Link Setup mode allows you to access transceiver options
that affect transceiver operation and security.
This chapter contains the following Link Setup procedures:
• Link Setup mode enter/exit (9-2)
• Antenna band or channel control (9-5)
• PIN setup (9-8)
• Setup mode availability on/off (9-11)
• Transceiver reset to factory settings (9-13).
If you make a mistake and want to exit half way through a
Link Setup procedure, press the
F1
button on the control
panel or
PTT
button on the microphone. This will return
you to the start of Link Setup mode without making any
changes.
HF SSB transceiver reference manual 9-1
9 Link Setup mode
Link Setup mode allows you to access transceiver options
that affect transceiver operation and security.
This chapter contains the following Link Setup procedures:
• Link Setup mode enter/exit (9-2)
• Antenna band or channel control (9-5)
• PIN setup (9-8)
• Setup mode availability on/off (9-11)
• Transceiver reset to factory settings (9-13).
If you make a mistake and want to exit half way through a
Link Setup procedure, press the
F1
button on the control
panel or
PTT
button on the microphone. This will return
you to the start of Link Setup mode without making any
changes.