Codan HF SSB - Link Setup mode enter;exit

Link Setup mode
9-2 HF SSB transceiver reference manual
Link Setup mode enter/exit
To use Link Setup mode, you have to take off the bottom
cover of the transceiver and reposition an internal link.
Figure 9.1 shows the location of this link on the underneath
side of the bottom printed circuit board.
SAA1064 SAA1064
IC114
IC109
Underneath view of
transceiver (bottom
cover removed) showing
bottom printed circuit
board
LINK
Transceiver front
Transceiver rear
Parked
position
Link setup
position
1 2 3 4 A B
1 2 3 4 A B
Figure 9.1
Moving the link for Link Setup mode
Link Setup mode
9-2 HF SSB transceiver reference manual
Link Setup mode enter/exit
To use Link Setup mode, you have to take off the bottom
cover of the transceiver and reposition an internal link.
Figure 9.1 shows the location of this link on the underneath
side of the bottom printed circuit board.
SAA1064 SAA1064
IC114
IC109
Underneath view of
transceiver (bottom
cover removed) showing
bottom printed circuit
board
LINK
Transceiver front
Transceiver rear
Parked
position
Link setup
position
1 2 3 4 A B
1 2 3 4 A B
Figure 9.1
Moving the link for Link Setup mode