Codan HF SSB - Recall channels by frequency on;off

Setup procedures—Part 3
7-22 HF SSB transceiver reference manual
Recall channels by frequency on/off
Setup code 32 (standard procedure)
This procedure is used to select whether or not you can recall
channels by frequency.
To switch on or off the recalling of channels by frequency:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 32
numeral
button
The display shows:
EXIT
Enable freq recall
ENTER
ENABLED
Recall by Frequency
or
EXIT
Recall by Frequency
Disable freq recall
ENTER
DISABLED
Setup procedures—Part 3
7-22 HF SSB transceiver reference manual
Recall channels by frequency on/off
Setup code 32 (standard procedure)
This procedure is used to select whether or not you can recall
channels by frequency.
To switch on or off the recalling of channels by frequency:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 32
numeral
button
The display shows:
EXIT
Enable freq recall
ENTER
ENABLED
Recall by Frequency
or
EXIT
Recall by Frequency
Disable freq recall
ENTER
DISABLED