Codan HF SSB - Free-Tune Receiver mode availability on;off

Setup procedures—Part 2
HF SSB transceiver reference manual 6-19
Free-Tune Receiver mode availability on/off
Setup code 3442 (standard procedure)
This procedure is used to switch on or off the availability of
Free-Tune Receiver mode.
Free-Tune Receiver mode allows you to tune the receiver to
any frequency in its operating frequency range.
To switch on or off the availability of Free-Tune Receiver
mode:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 3442
numeral
button
The display shows:
EXIT ENTER
ENABLED
Receive Frequencies
or
EXIT
Receive Frequencies
ENTER
DISABLED
Setup procedures—Part 2
HF SSB transceiver reference manual 6-19
Free-Tune Receiver mode availability on/off
Setup code 3442 (standard procedure)
This procedure is used to switch on or off the availability of
Free-Tune Receiver mode.
Free-Tune Receiver mode allows you to tune the receiver to
any frequency in its operating frequency range.
To switch on or off the availability of Free-Tune Receiver
mode:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 3442
numeral
button
The display shows:
EXIT ENTER
ENABLED
Receive Frequencies
or
EXIT
Receive Frequencies
ENTER
DISABLED