Codan HF SSB User Manual

Setup procedures—Part 4
8-16 HF SSB transceiver reference manual
Selcall lockout on/off
Setup code 2441
This procedure is used to switch on or off selcall lockout.
Selcall lockout prevents you from sending selective calls if
the transceiver detects that another station is already in the
process of sending a selective call on the same channel. This
reduces call interference between stations and increases the
chance of success when your call is transmitted.
Selcall lockout does not apply to voice, tone or emergency
calls.
To switch on or off selcall lockout:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2441
numeral
button
The display shows:
EXIT
S'call Lockout Setup
Call lockout enabled
ENTER
ENABLED
or
EXIT
S'call Lockout Setup
Call lockout disabled
ENTER
DISABLED
Setup procedures—Part 4
8-16 HF SSB transceiver reference manual
Selcall lockout on/off
Setup code 2441
This procedure is used to switch on or off selcall lockout.
Selcall lockout prevents you from sending selective calls if
the transceiver detects that another station is already in the
process of sending a selective call on the same channel. This
reduces call interference between stations and increases the
chance of success when your call is transmitted.
Selcall lockout does not apply to voice, tone or emergency
calls.
To switch on or off selcall lockout:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2441
numeral
button
The display shows:
EXIT
S'call Lockout Setup
Call lockout enabled
ENTER
ENABLED
or
EXIT
S'call Lockout Setup
Call lockout disabled
ENTER
DISABLED

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English