Codan HF SSB - Power up address display on;off

Setup procedures—Part 3
7-16 HF SSB transceiver reference manual
Power up address display on/off
Setup code 34413
This procedure is used to select whether or not your address,
set up in selcall group 1, is briefly displayed when the
transceiver is first switched on.
To switch on or off the display of the address:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 34413
numeral
button
The display shows:
EXIT
Power Up Self ID
ENTER
SHOW SELF ID
or
EXIT
Power Up Self ID
ENTER
HIDE SELF ID
Setup procedures—Part 3
7-16 HF SSB transceiver reference manual
Power up address display on/off
Setup code 34413
This procedure is used to select whether or not your address,
set up in selcall group 1, is briefly displayed when the
transceiver is first switched on.
To switch on or off the display of the address:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 34413
numeral
button
The display shows:
EXIT
Power Up Self ID
ENTER
SHOW SELF ID
or
EXIT
Power Up Self ID
ENTER
HIDE SELF ID