Setup procedures—Part 1
HF SSB transceiver reference manual 5-19
Call privacy on/off
Setup code 2443
This procedure is used to limit the stations that can receive
your transmissions of GPS, page and status call information.
You switch on call privacy by setting a privacy key (a
number up to six digits). This restricts the stations that can
receive your information to those using an identical privacy
key.
To switch on or off call privacy:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2443
numeral
button
If privacy is unset, the privacy
key is shown as 0 like this:
EXIT
Enter Privacy Key
ENTER
Key: – – – – – 0
If privacy is set, the privacy
key is hidden like this:
EXIT ENTER
ALE
Setup Call Preamble
ALE Preamble
Setup procedures—Part 1
HF SSB transceiver reference manual 5-19
Call privacy on/off
Setup code 2443
This procedure is used to limit the stations that can receive
your transmissions of GPS, page and status call information.
You switch on call privacy by setting a privacy key (a
number up to six digits). This restricts the stations that can
receive your information to those using an identical privacy
key.
To switch on or off call privacy:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2443
numeral
button
If privacy is unset, the privacy
key is shown as 0 like this:
EXIT
Enter Privacy Key
ENTER
Key: – – – – – 0
If privacy is set, the privacy
key is hidden like this:
EXIT ENTER
ALE
Setup Call Preamble
ALE Preamble