Codan HF SSB - GPS timeout on;off

Setup procedures—Part 2
HF SSB transceiver reference manual 6-23
GPS timeout on/off
Setup code 3422
This procedure is used to switch on or off the GPS timeout
warning.
When GPS timeout is switched on, the transceiver beeps if it
does not receive GPS information within the set time.
You can select:
•
5 mins
•
10 mins
•
15 mins
•
20 mins
•
35 mins
•
OFF
(no error beep).
To switch on or off GPS timeout:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
Setup procedures—Part 2
HF SSB transceiver reference manual 6-23
GPS timeout on/off
Setup code 3422
This procedure is used to switch on or off the GPS timeout
warning.
When GPS timeout is switched on, the transceiver beeps if it
does not receive GPS information within the set time.
You can select:
•
5 mins
•
10 mins
•
15 mins
•
20 mins
•
35 mins
•
OFF
(no error beep).
To switch on or off GPS timeout:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2