Codan HF SSB User Manual

Setup procedures—Part 1
5-28 HF SSB transceiver reference manual
Clone a transceiver
(standard procedure)
This procedure is used to copy the settings from one
transceiver to another by a process called cloning. Cloning
transceivers allows you to set up several transceivers that all
work in exactly the same way.
You clone transceivers by connecting the microphone socket
of the transceiver, which is already set up, to the microphone
socket of a transceiver that is to become a clone.
You can obtain the cable required for this procedure from an
authorised Codan dealer (Codan part no. 08-05138-001).
Except for the PIN, selcall group information and
alphanumeric address, the cloning procedure overwrites all
settings in the transceiver that you are copying to.
To clone a transceiver:
Action Notes
1.
Use the Cloning cable
to join the microphone
sockets of the two
transceivers.
2.
Switch on both
transceivers.
Setup procedures—Part 1
5-28 HF SSB transceiver reference manual
Clone a transceiver
(standard procedure)
This procedure is used to copy the settings from one
transceiver to another by a process called cloning. Cloning
transceivers allows you to set up several transceivers that all
work in exactly the same way.
You clone transceivers by connecting the microphone socket
of the transceiver, which is already set up, to the microphone
socket of a transceiver that is to become a clone.
You can obtain the cable required for this procedure from an
authorised Codan dealer (Codan part no. 08-05138-001).
Except for the PIN, selcall group information and
alphanumeric address, the cloning procedure overwrites all
settings in the transceiver that you are copying to.
To clone a transceiver:
Action Notes
1.
Use the Cloning cable
to join the microphone
sockets of the two
transceivers.
2.
Switch on both
transceivers.

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English