To Next Page

To Previous Page

HF SSB transceiver reference manual 4-1

4 Using Setup mode procedures

Setup mode allows you to view and change settings that

control transceiver operation.

This chapter:

• explains how to use Setup mode (4-2)

• lists the procedures available in Setup mode (4-3)

• gives some tips on using Setup mode for advanced users

(4-7).

You should read this chapter before running any of the Setup

mode procedures. Chapters 5–8 cover in detail the Setup

mode procedures for the full range of HF SSB series

transceivers. Not all of these procedures may be available in

your transceiver.

You can only use the Setup mode procedures that:

• are standard for all HF SSB series transceivers (see List

of Setup mode procedures on page 4-3)

• correspond to transceiver options factory fitted for your

version of the transceiver in the HF SSB series range

(refer to the front of your HF SSB transceiver user guide

for the list of factory fitted transceiver options)

• correspond to transceiver options that you have

additionally enabled in your transceiver by using

passwords (see Chapter 7, Password entry to enable

transceiver options).