Codan HF SSB - Power up mute setting

Setup procedures—Part 3
HF SSB transceiver reference manual 7-13
Power up mute setting
Setup code 34412 (standard procedure)
This procedure is used to select the initial mute setting that
is used when the transceiver is first switched on.
You can select:
•
NO MUTE
•
AUDIO MUTE
•
SELCALL MUTE
(if selcall mute availability is
switched on, see Chapter 8, Selcall mute availability
on/off).
To change the initial mute setting:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
Setup procedures—Part 3
HF SSB transceiver reference manual 7-13
Power up mute setting
Setup code 34412 (standard procedure)
This procedure is used to select the initial mute setting that
is used when the transceiver is first switched on.
You can select:
•
NO MUTE
•
AUDIO MUTE
•
SELCALL MUTE
(if selcall mute availability is
switched on, see Chapter 8, Selcall mute availability
on/off).
To change the initial mute setting:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2