Codan HF SSB User Manual

Setup procedures—Part 3
7-24 HF SSB transceiver reference manual
RF gain on/off
Setup code 3443 (standard procedure)
This procedure is used to switch on or off the RF gain. This
changes the receive sensitivity of the transceiver.
Switch on RF gain for a mobile station or for an area where
electrical interference is low. Switch off RF Gain for a base
station that has large antennas or for an area where electrical
interference is high.
To switch on or off the RF gain:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 3443
numeral
button
The display shows:
EXIT ENTER
ON
RF Gain Control
RF gain on
or
EXIT ENTER
OFF
RF Gain Control
RF gain off
Setup procedures—Part 3
7-24 HF SSB transceiver reference manual
RF gain on/off
Setup code 3443 (standard procedure)
This procedure is used to switch on or off the RF gain. This
changes the receive sensitivity of the transceiver.
Switch on RF gain for a mobile station or for an area where
electrical interference is low. Switch off RF Gain for a base
station that has large antennas or for an area where electrical
interference is high.
To switch on or off the RF gain:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 3443
numeral
button
The display shows:
EXIT ENTER
ON
RF Gain Control
RF gain on
or
EXIT ENTER
OFF
RF Gain Control
RF gain off

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English