Setup procedures—Part 3
HF SSB transceiver reference manual 7-5
Password entry to enable transceiver options
Setup code 42 (standard procedure)
This procedure is used to:
• display your transceiver ID
• enable transceiver options that are built into the
transceiver
• delete your PIN if you have forgotten it.
By using passwords, you can purchase additional features for
your transceiver without the need to return the unit to your
Codan agent.
You obtain passwords from your Codan agent. There is a
separate password for each transceiver option. Passwords are
unique to your transceiver. You cannot use your
transceiver’s passwords with a different transceiver.
Enabling transceiver options
You can enable a transceiver option using a password.
After you have enabled an option, you may need to use other
Setup mode procedures to enter settings that control the
option.
You can remove an option previously enabled by repeating
the procedure and entering the password again.
Setup procedures—Part 3
HF SSB transceiver reference manual 7-5
Password entry to enable transceiver options
Setup code 42 (standard procedure)
This procedure is used to:
• display your transceiver ID
• enable transceiver options that are built into the
transceiver
• delete your PIN if you have forgotten it.
By using passwords, you can purchase additional features for
your transceiver without the need to return the unit to your
Codan agent.
You obtain passwords from your Codan agent. There is a
separate password for each transceiver option. Passwords are
unique to your transceiver. You cannot use your
transceiver’s passwords with a different transceiver.
Enabling transceiver options
You can enable a transceiver option using a password.
After you have enabled an option, you may need to use other
Setup mode procedures to enter settings that control the
option.
You can remove an option previously enabled by repeating
the procedure and entering the password again.
To Next Page
Loading...
Need help?
General
