Codan HF SSB - ALE option reset

Setup procedures—Part 1
5-4 HF SSB transceiver reference manual
ALE option reset
Setup code 2432
This procedure is used to reset 9 of the 17 ALE option
settings 0–16 to their factory values.
To reset the ALE option settings:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2432
numeral
button
The display shows:
EXIT ENTER
Press ENTER to reset
ALE system options
3.
Press
F2
The display shows:
EXIT ENTER
Press ENTER again to
reset ALE options
Setup procedures—Part 1
5-4 HF SSB transceiver reference manual
ALE option reset
Setup code 2432
This procedure is used to reset 9 of the 17 ALE option
settings 0–16 to their factory values.
To reset the ALE option settings:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 2432
numeral
button
The display shows:
EXIT ENTER
Press ENTER to reset
ALE system options
3.
Press
F2
The display shows:
EXIT ENTER
Press ENTER again to
reset ALE options