Codan HF SSB User Manual

Setup procedures—Part 3
7-20 HF SSB transceiver reference manual
PTT transmit cutout
Setup code 3431 (standard procedure)
This procedure is used to set the PTT transmit cutout time,
preventing the transceiver from being left on in the transmit
state by mistake.
If the transmit time exceeds the time set for PTT transmit
cutout, the transceiver switches to receive and displays an
error message.
This cutout does not apply to any equipment connected to the
GP
connector.
You can select:
•
OFF
(transmission never cuts out)
•
5 mins
•
10 mins
•
15 mins
•
20 mins
•
35 mins
.
To set the PTT transmit cutout time:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
Setup procedures—Part 3
7-20 HF SSB transceiver reference manual
PTT transmit cutout
Setup code 3431 (standard procedure)
This procedure is used to set the PTT transmit cutout time,
preventing the transceiver from being left on in the transmit
state by mistake.
If the transmit time exceeds the time set for PTT transmit
cutout, the transceiver switches to receive and displays an
error message.
This cutout does not apply to any equipment connected to the
GP
connector.
You can select:
•
OFF
(transmission never cuts out)
•
5 mins
•
10 mins
•
15 mins
•
20 mins
•
35 mins
.
To set the PTT transmit cutout time:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2

Codan HF SSB Specifications

General

Brand	Codan
Model	HF SSB
Category	Transceiver
Language	English