Codan HF SSB - Telcall availability on;off

Setup procedures—Part 4
8-22 HF SSB transceiver reference manual
Telcall availability on/off
Setup code 22
This procedure is used to switch on or off the ability to send
telcalls.
For information on telcalls, refer to the HF SSB transceiver
user guide, Chapter 4, Telcall.
To switch on or off the ability to send telcalls:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 22
numeral
button
The display shows:
EXIT
Telcall Enabled
ENTER
ENABLED
Telcall Setup
or
EXIT ENTER
DISABLED
Telcall Setup
Telcall Disabled
Setup procedures—Part 4
8-22 HF SSB transceiver reference manual
Telcall availability on/off
Setup code 22
This procedure is used to switch on or off the ability to send
telcalls.
For information on telcalls, refer to the HF SSB transceiver
user guide, Chapter 4, Telcall.
To switch on or off the ability to send telcalls:
Action Notes
1.
Repeatedly press
Mode
until you see the
display for Setup mode.
The display shows:
EXIT
SETUP MENU
1–Scan
2–Call
ENTER
3–Config
4–More
1/2
2.
Enter 22
numeral
button
The display shows:
EXIT
Telcall Enabled
ENTER
ENABLED
Telcall Setup
or
EXIT ENTER
DISABLED
Telcall Setup
Telcall Disabled