Codan HF SSB - Page 118

Setup procedures—Part 2
6-20 HF SSB transceiver reference manual
Action Notes
3.
To switch between
ENABLED
and
DISABLED
, rotate
Select
Select:
•
ENABLED
if you want to
be able to tune the
transceiver to any receive
frequency
•
DISABLED
if you only
want to use pre-
programmed channels.
4.
To save your change,
press
F2
The display shows:
EXIT
CONFIG MENU
1–PowerUp
ENTER
3–RF Gain
3/3
4–More
2–Receiver
5.
To return to Channel
mode, press twice
F1
Example of the display:
149
2040
CALL
Rx.
USB
HI
Geneva Switzerland
Pwr

Setup procedures—Part 2
6-20 HF SSB transceiver reference manual
Action Notes
3.
To switch between
ENABLED
and
DISABLED
, rotate
Select
Select:
•
ENABLED
if you want to
be able to tune the
transceiver to any receive
frequency
•
DISABLED
if you only
want to use pre-
programmed channels.
4.
To save your change,
press
F2
The display shows:
EXIT
CONFIG MENU
1–PowerUp
ENTER
3–RF Gain
3/3
4–More
2–Receiver
5.
To return to Channel
mode, press twice
F1
Example of the display:
149
2040
CALL
Rx.
USB
HI
Geneva Switzerland
Pwr
