To Next Page

To Previous Page

HF SSB transceiver reference manual 2-1

2 Installation

This chapter describes how to install your transceiver and

connect the components that make up your station.

It covers:

• type of station (2-2)

• mounting the transceiver (2-5)

• mounting the control head and loudspeaker (2-8)

• power supply (2-11)

• grounding (2-12)

• ancillary equipment (2-13).

On receiving your transceiver, check the contents against the

packing list. Make sure that nothing is missing before

starting installation.

The procedures for installing your transceiver are not

comprehensive. They are to be used as a guide only. We

recommend that installation be carried out by qualified and

experienced personnel.