Codan HF SSB - Page 189

Link Setup mode
HF SSB transceiver reference manual 9-9
Action Notes
2.
Enter 1
numeral
button
If a PIN is currently set, the
display shows:
EXIT ENTER
Enter Old Pin
– – – – – –
If no PIN is currently set, the
display shows:
EXIT ENTER
Enter New Pin
– – – – – –
3.
Is a PIN already set?
Yes  Step 4.
No  Step 6.
4.
Enter the current PIN
numeral
button
5.
Press
F2
The transceiver beeps twice
and switches off if you enter
the wrong PIN. Switch the
transceiver on and repeat the
procedure.
Link Setup mode
HF SSB transceiver reference manual 9-9
Action Notes
2.
Enter 1
numeral
button
If a PIN is currently set, the
display shows:
EXIT ENTER
Enter Old Pin
– – – – – –
If no PIN is currently set, the
display shows:
EXIT ENTER
Enter New Pin
– – – – – –
3.
Is a PIN already set?
Yes  Step 4.
No  Step 6.
4.
Enter the current PIN
numeral
button
5.
Press
F2
The transceiver beeps twice
and switches off if you enter
the wrong PIN. Switch the
transceiver on and repeat the
procedure.