Codan HF SSB - Page 194

Link Setup mode
9-14 HF SSB transceiver reference manual
To reset some or all of the transceiver settings to their
factory values:
Action Notes
1.
Enter Link Setup
mode.
See Link Setup mode enter/exit
on page 9-2.
The display shows:
LINK SETUP MENU
1–Pin
2–Inhibit
ENTER
3–Antenna
4–Reset
2.
Enter 4
numeral
button
The display shows:
EXIT
Press F2 to:
RESET
Delete all
unprotected channels
3.
To switch between the
three types of reset,
rotate
Select
Select:
•
Delete all unprotected
channels
—to delete just
unprotected channels
•
Reset user settings to
factory defaults
—to reset
user settings but not
channels
•
Reset user settings,
delete all channels
—to
reset user settings and all
channels—full transceiver
reset.
Use with caution!
Link Setup mode
9-14 HF SSB transceiver reference manual
To reset some or all of the transceiver settings to their
factory values:
Action Notes
1.
Enter Link Setup
mode.
See Link Setup mode enter/exit
on page 9-2.
The display shows:
LINK SETUP MENU
1–Pin
2–Inhibit
ENTER
3–Antenna
4–Reset
2.
Enter 4
numeral
button
The display shows:
EXIT
Press F2 to:
RESET
Delete all
unprotected channels
3.
To switch between the
three types of reset,
rotate
Select
Select:
•
Delete all unprotected
channels
—to delete just
unprotected channels
•
Reset user settings to
factory defaults
—to reset
user settings but not
channels
•
Reset user settings,
delete all channels
—to
reset user settings and all
channels—full transceiver
reset.
Use with caution!