About this manual
1-2 HF SSB transceiver reference manual
The manual contains 11 chapters.
Chapter 1 explains how to use the manual.
Chapter 2 explains how to install your transceiver and
connect the components that make up your station.
Chapter 3 explains how to set up channels, scan tables and
the telephone directory.
Chapter 4 explains how to use Setup mode. You should read
this before following any Setup mode procedure described in
Chapters 5–8.
Chapters 5–8 contain the Setup mode procedures that have
been separated into four parts for ease of reference.
Chapter 9 contains Link Setup mode procedures.
Chapter 10 lists all information and error messages output to
the transceiver display.
Chapter 11 covers technical information such as the
connector pin arrangements, ancillary equipment settings,
transceiver specifications, options and accessories.
We recommend that only Codan approved service agents
perform maintenance on the transceiver.
About this manual
1-2 HF SSB transceiver reference manual
The manual contains 11 chapters.
Chapter 1 explains how to use the manual.
Chapter 2 explains how to install your transceiver and
connect the components that make up your station.
Chapter 3 explains how to set up channels, scan tables and
the telephone directory.
Chapter 4 explains how to use Setup mode. You should read
this before following any Setup mode procedure described in
Chapters 5–8.
Chapters 5–8 contain the Setup mode procedures that have
been separated into four parts for ease of reference.
Chapter 9 contains Link Setup mode procedures.
Chapter 10 lists all information and error messages output to
the transceiver display.
Chapter 11 covers technical information such as the
connector pin arrangements, ancillary equipment settings,
transceiver specifications, options and accessories.
We recommend that only Codan approved service agents
perform maintenance on the transceiver.
To Next Page
Loading...
Need help?
General
